Your location: Home > Coiler series >
Contact Us

Taicang Hengcheng Machinery Co., Ltd
Address: Taifeng Village, Chengxiang Town, Taicang City, Jiangsu Province
Postal code: 215400
Tel.: (86.512) 5310-0920
Fax: (86.512) 5310-0720
http://www.slitting-rewinder.com   
Business contact:
Contact: Yuan Xinghua 13606242211
E-mail: info@slitting-rewinder.com

HC-7002 Single knife Double shaft Automatic Coiler

  • 所属分类:Coiler series
  • 浏览次数:588次
  • 发布日期:2022/9/19 9:28:38
  • 产品概述
Scope of application
This machine is mainly suitable for cutting of US grain/double-sided/foam tape, etc. (Double axis synchronous cutting, double the output of single axis)
Features
1. The servo motor controls the cutting width and works with the precision ball screw and slide rail to achieve high-precision cutting.
2. LCD touch screen is used for the operation interface, and various parameters and functional conditions can be set directly on the screen.
3. The central control system is a PLC programmable controller. Various sizes can be set in the coaxial line. The computer automatically adjusts the cutting width when cutting.
4. The cutting feed power is controlled by oil pressure, and the feed speed can be adjusted freely.
5. The cutter base is fixed. A single round cutter cuts two shafts at the same time. For cutting with different widths, the cutter must be replaced to achieve the flatness of the cutting surface.
Optional equipment
1. Manual/automatic adjustment of round knife angle: the knife base adopts manual/automatic adjustment structure (angle adjustment range ± 80). When the cutting plane is poor, the cutting angle can be directly changed.
2. Cutting shaft of small pipe center: the inner diameter of pipe center can be specified according to customer requirements.
3. Cutting shaft support frame: it is used to cut the pipe core length of 1.0M, the pipe core diameter is less than 38mm, or the pipe core length of 1.6M, the pipe core diameter is less than 50mm.
4. Flip type safety cover: after installation, it can protect the operator's safety and meet the international CE approval standards.
Technical parameters
1. Mechanical width: 1.0M/1.3M/1.6M
2. Cutting diameter: Ø 150mm
3. Inner diameter of cutting pipe core: 22-77mm (1 "- 3")
4. Minimum cutting width: 3mm
5. Diameter of round knife: Ø 300mm
-Due to the continuous improvement of product design, the above information is for reference only.
-If you need detailed data, please contact the business personnel or fill in the specification form, and we will handle it for you as soon as possible!

Next:HC-7001 single knife single shaft automatic coil cutter

Address: Taifeng Village, Chengxiang Town, Taicang City, Jiangsu Province

Postal code: 215400

Company Office Number: (86.512)5310-0920

http://www.slitting-rewinder.com

E-mail: info@slitting-rewinder.com

Scan your phone

copyright: Taicang Hengcheng Machinery Co., Ltd Filing No:苏ICP备10211832号-1 技术支持:仕德伟科技