Scope of application
This machine is mainly suitable for cutting of US grain/double-sided/foam tape, etc.
Features
1. The servo motor controls the cutting width and works with the precision ball screw and slide rail to achieve high-precision cutting.
2. LCD touch screen is used for the operation interface, and various parameters and functional conditions can be set directly on the screen.
3. The central control system is a PLC programmable controller. Various sizes can be set in the coaxial line. The computer automatically adjusts the cutting width when cutting.
4. The cutting feed power is controlled by oil pressure, and the feed speed can be adjusted freely.
5. Manual adjustment of round knife angle: The knife base adopts a manual adjustment structure (angle adjustment range ± 80). When the cutting plane is poor, the cutting angle can be directly changed.
Optional equipment
1. Automatic adjustment of round knife angle: The knife base adopts an automatic adjustment structure (angle adjustment range ± 80). When the cutting plane is poor, the cutting angle can be directly changed.
2. Cutting shaft of small pipe center: the inner diameter of pipe center can be specified according to customer requirements.
3. Cutting shaft support frame: it is used to cut the pipe core length of 1.0M, the pipe core diameter is less than 38mm, or the pipe core length of 1.6M, the pipe core diameter is less than 50mm.
4. Flip type safety cover: after installation, it can protect the operator's safety and meet the international CE approval standards.
Technical parameters
1. Mechanical width: 1.0M/1.3M/1.6M
2. Cutting diameter: Ø 150mm
3. Inner diameter of cutting pipe core: 22-77mm (1 "- 3")
4. Minimum cutting width: 3mm
5. Diameter of round knife: Ø 180mm
-Due to the continuous improvement of product design, the above information is for reference only.
-If you need detailed data, please contact the business personnel or fill in the specification form, and we will handle it for you as soon as possible!
